CHASSIS:
2016 IHC, 7600 SBA 6x4
63,240 miles, original motor dropped a valve, 2500 miles on new pistons & liners.
APPLICATION: RR Hi-Railer
MISSION: Requested GVWR: 54000. Calc. GVWR: 54000
Calc. Start / Grade Ability: 21.31% / 2.71% @ 55 MPH
Calc. Geared Speed: 74.6 MPH
DIMENSION: Wheelbase: 268.00, CA: 157.00, Axle to Frame: 81.00
ENGINE, DIESEL: {Navistar N10 330} 330HP @ 2000 RPM, 1250 lb-ft Torque @ 1400 RPM, 2100 RPM
Governed Speed, 330 Peak HP (Max)
TRANSMISSION, Fuller RTO-14908LL
PTO Provision, Less Retarder, Includes Oil Level Sensor, On/Off Highway
CLUTCH: Omit Item (Clutch & Control)
AXLE, FRONT NON-DRIVING: {Meritor MFS-14-143A} Wide Track, I-Beam Type, 14,000-lb Capacity
AXLE, REAR, TANDEM: {Meritor MT-40-14X-4DCR} Single Reduction, 40,000-lb Capacity, 0.433"(11mm) Wall Housing
Thickness, Driver Controlled Locking Differential in Forward-Rear and Rear-Rear Axle, R Wheel
Ends.
CAB: Conventional 6-Man Crew Cab
TIRE, FRONT: (2) 12R22.5 Load Range H HSR2 (CONTINENTAL), 483 rev/mile, 75 MPH, All-Position
TIRE, REAR: (8) 11R22.5 Load Range G HDR2 ECO PLUS (CONTINENTAL), 491 rev/mile, 75 MPH, Drive
SUSPENSION, REAR, AIR, TANDEM: {Hendrickson HAS-402-55} 40,000-lb Capacity, 55" Axle Spacing, 9.5" Ride Height, with Shock
Absorbers, Mounted Inboard
FRAME REINFORCEMENT: Outer "C" Channel, Heat Treated Alloy Steel (120,000 PSI Yield); 10.813" x 3.892" x 0.312";
(274.6mm x 98.9mm x 8.0mm); 480.0" (12192mm) Maximum OAL
PAINT: Cab schematic 100GN
Location 1: 9219, Winter White (Std)
Four drop down steps, one under each door for easy access on rail.
BODY:
- Knapheide NS129HT Tandem
- Quoted by Knapheide to match the existing body at Wheeling & Lake Erie RW.
- The serial number of the existing body was provided to Knapheide.
- Diamond plate steps / bumper to house tool circuits and crane.
- Hand railings built into rear body steps for rail access.
- Two pull out steps in rear bumper. For access on rail.
- Front crane boom support built into front of body.
- Sprayed on bed liner on all walk areas.
- Body installed.
- Pintel hitch.
CRANE:
- 14/98SL (single link)
- 3 hydraulic extensions.
- Standard outriggers, spread of 15’2”
- Fixed stabilizers.
- Scanreco remote controls.
- Shear mount kit.
- LCD display on transmitter.
- Crane installed and tested.
HYDRAULICS:
- PTO, with automatic lockout system to disengage if RPM exceeds 1400.
- Load sense piston pump.
- 50 gallon aluminum hydraulic tank.
- Single filter base.
- Multi visc. Hydraulic oil.
- Heavy duty frame mounted oil cooler.
TOOL CIRCUIT:
- (2) 5/10 gpm. tool circuit
- Hanney hose reel
- ½” x 50’ twin hose reel with roller guide, mounted on rear of chassis.
OXY / ACTY:
- Hose reel
- Oxy/acty hose.
- Installed on rear bumper.
HIRAIL GEAR:
- DMF RW1630/30 rail gear.
- Air brakes, front.
- Rail sweeps, front.
- Slotted rear links.
- Rear air pin off’s.
- Axle end insulation.
TRACK LIGHTING:
- LED work lights mounted on all four corners, on in cab switches.
- LED lights mounted to light up hirail gear at all four corners, on in cab switches.
- LED work lights (2) mounted in bed area, on in cab switches.
- Two mirror mounted strobe light, on in cab switches.
- Four corner strobe lights, on in cab switches.
MISC:
- Operators manuals,
- DOT striping.
- Fire extinguisher, triangles and first aid kit.
THIS TRUCK LOOKS GREAT AND YOU WILL BE PROUD TO HAVE HER IN YOUR FLEET!
--BUYER WILL RECEIVE A 60 DAY TEMP TAG FROM OUR DEALERSHIP. FOLLOWED BY A TITLE IN THE MAIL.
IF I LEFT SOMETHING OUT JUST CALL ME AND I WILL TRY TO ANSWER YOUR QUESTIONS.
NEED IT SHIPPED? NO PROBLEM JUST CALL FOR A QUOTE.
CALL TROY AT
970-466-2886
WITH QUESTIONS.

Payment is due within 3 days
FREIGHT OR LOCAL PICKUP
All sales are final unless otherwise stated
REMEMBER--------
"IF IT DOESN'T SAY RAILIRON--- ITS JUST IRON"